Free HVAC Journeyman Practice Test 2026

200 HVAC journeyman questions on the 2024 codes and four 50-question tests. Free to start, no account needed.

Try one now

Pick an answer

Space heating must hold what indoor temperature on the design heating day?

The HVAC Journeyman exam at a glance

The HVAC or mechanical journeyman exam is the written exam a state or city gives before it licenses a journeyman to install and service heating, ventilation, air conditioning and refrigeration systems under a licensed contractor. There is no national exam: each board sets its own, usually through PSI, Prometric or ICC, and most are open book on the International Mechanical Code edition it has adopted, often with the Fuel Gas Code. Maryland's HVACR Journeyman exam, for example, is 100 questions in 240 minutes with 70% to pass and covers electrical, piping, refrigeration, heating, air distribution and safety. ICC's current model code is the 2024 IMC; many boards still use the 2018 or 2021 edition.

Tigertest has 200 HVAC Journeyman practice questions with explanations, free to start with no account required.

Questions
Varies by state (Maryland HVACR Journeyman: 100)
Time
Varies (Maryland: 240 minutes)
Passing score
Varies, often 70%
Format
Usually open book on the adopted IMC edition
Current model code
2024 International Mechanical Code and Fuel Gas Code
Given by
State and city licensing boards via PSI, Prometric or ICC

Updated by the Tigertest team. Practice questions follow The 2024 IMC and IFGC on ICC's free public-access site and Maryland's PSI HVACR candidate bulletin (updated 9/1/2024), checked November 2026. Exam rules change, so confirm current details with Maryland HVACR candidate information bulletin (PSI).

How It Works

Train by Topic

Four training sets that follow the Mechanical Code: equipment location and access; ventilation, exhaust and ducts; chimneys, vents and fuel gas; and boilers, hydronics and refrigeration. Questions you miss come back until you have mastered them.

50-Question Practice Tests

Four practice tests of 50 questions across the whole code, each with a 70% readiness line. No question appears in more than one test, and every answer comes with a short explanation.

Built on the 2024 Mechanical Code

No board publishes a per-chapter split, so each 50-question practice test spreads the code the way a journeyman meets it on the job: 8 on equipment location, 7 each on exhaust and ducts, 6 each on access, vents, fuel gas and hydronics, and 4 on refrigeration.

Equipment Location & Installation16%
Ventilation & Exhaust Systems14%
Duct Systems & Plenums14%
Access, Service Space & Condensate12%
Chimneys, Vents & Clearances12%
Combustion Air & Gas Piping12%
Boilers & Hydronic Piping12%
Refrigeration Systems8%
Tigertest mascot

Help Make Tigertest Better

Have an idea, a topic you'd like covered, or a question that could be clearer? We read every message and use it to improve every test.

Share Feedback

How to Pass the HVAC Journeyman Exam

1. Get your own code book

Most journeyman exams are open book, so the edition your board names is your most important tool. Tab the chapters (3 general, 4 and 5 ventilation and exhaust, 6 ducts, 8 vents, 10 boilers, 11 refrigeration, 12 hydronics) and the Fuel Gas Code's combustion air and piping test sections.

2. Learn the numbers that come up most

18 inches to an ignition source in a garage, a 30 by 30 inch service space, 1/8 inch per foot for condensate, 35 feet for a dryer duct, 10 feet between intakes and exhaust, 50 cubic feet per 1,000 Btu/h for combustion air. Knowing them saves time for the look-ups.

3. Practice the calculations

Dryer duct length after fittings, combustion air opening sizes, dwelling outdoor air by Equation 4-9, connector length as a share of vent height, and test pressures with their minimums. Write the formula, then put the numbers in.

4. Check what else your state tests

Many state outlines add electrical controls, refrigeration theory, load calculations and OSHA safety to the code. Read your bulletin, study those too, then take the 50-question tests here and aim for 85% before your exam.

HVAC Journeyman Exam Frequently Asked Questions

What is the HVAC journeyman exam?

It is the written exam a state or city gives before it licenses a journeyman HVAC, HVACR or mechanical worker, who then works under a licensed contractor. There is no single national exam: each licensing board sets its own, usually through PSI, Prometric or ICC, and most are open book on the International Mechanical Code the board has adopted.

How many questions are on the journeyman mechanical exam, and what is the passing score?

It varies by state. Maryland's HVACR Journeyman exam, for example, is 100 questions in 240 minutes, open book, with 70% to pass, and it also covers electrical, refrigeration theory and safety. Check your own board's candidate bulletin for the count, time, pass mark and allowed books. The practice tests here use 70% as a readiness line.

Which edition of the Mechanical Code does my exam use?

The one your state or city has adopted, which is often older than the newest model code. ICC publishes a new International Mechanical Code every three years, and 2024 is the current one; many boards still test on the 2018 or 2021 edition, and some amend it. These questions follow the 2024 text, so check any number against the edition your bulletin names.

What does this practice test cover?

The code knowledge a journeyman installs to: equipment location, garages and access; condensate; ventilation, dryer and range hood exhaust; ducts and plenums; chimneys, vents and clearance reduction; combustion air, CSST bonding and gas piping tests from the Fuel Gas Code; boilers, relief valves and hydronic piping; and refrigeration piping. It does not cover electrical theory, refrigeration theory, load calculations or OSHA safety, which many state exams also include.

Are these real exam questions?

No. Every question is original, written by Tigertest from the 2024 International Mechanical Code and International Fuel Gas Code. Tigertest is not affiliated with the International Code Council, PSI, Prometric or any state licensing board, and no real exam or prep book question was used.

I teach an HVAC apprenticeship program or code class. Can my students use Tigertest?

Yes, for free. Make a class at tigertest.io/teach, post one link, and students join with just their name. You see who practiced, their test scores and the topics your class misses most.

HVAC Journeyman sample questions and answers

6 of the 200 practice questions, one from each topic, with the answer explained.

  1. 1. A ductless mini-split that produces condensate needs what in its drain line?

    • A.Pressure relief valve
    • B.Check valve or a trap
    • C.Backwater valve
    • D.Air gap fitting

    Answer: B. IMC 307.2.4.1 requires ductless mini-split equipment that produces condensate to have an inline check valve in the drain line, or a trap.

  2. 2. For R-value labeling, duct wrap is assumed installed at what share of its nominal thickness?

    • A.50 percent
    • B.90 percent
    • C.100 percent
    • D.75 percent

    Answer: D. IMC 604.7 assumes duct wrap is installed at 75 percent of nominal thickness, meaning 25 percent compression.

  3. 3. A horizontal grease duct runs 90 feet. What slope does it need toward the hood or reservoir?

    • A.1 unit in 12
    • B.1/4 unit in 12
    • C.1/8 unit in 12
    • D.2 units in 12

    Answer: A. IMC 506.3.7 requires 1/4 unit in 12 generally but 1 unit in 12 where horizontal grease ducts exceed 75 feet.

  4. 4. Gas piping across a roof must be elevated at least how far above the roof surface?

    • A.6 inches
    • B.1-1/2 inches
    • C.3-1/2 inches
    • D.2 inches

    Answer: C. IFGC 404.9 requires outdoor piping to be elevated not less than 3-1/2 inches above the ground or roof surface and supported.

  5. 5. Before hanging an air handler from a roof truss, what must be verified?

    • A.The hanger rods are galvanized
    • B.The attic is ventilated
    • C.The truss can carry the load
    • D.The truss is fire-retardant treated

    Answer: C. IMC 302.4 bars adding loads such as HVAC equipment to a truss without verification that it can support them, and bars cutting or altering trusses without a design professional's approval.

  6. 6. What is the maximum horizontal support spacing for copper tubing in a mechanical system?

    • A.8 feet
    • B.6 feet
    • C.10 feet
    • D.12 feet

    Answer: A. IMC Table 305.4 allows 8 feet horizontal for copper or copper-alloy tubing. Twelve feet is for copper pipe, and 10 feet is the vertical spacing.

Every test on Tigertest is free to start, with no account needed.

See all 500 practice tests

Ready for Your HVAC Journeyman Exam?

Start for free. No account required. 200 questions across the Mechanical and Fuel Gas Codes.

Start practicing