Free JNCIA-Junos Practice Test 2026

186 questions on the seven JN0-106 exam objectives. Free to start, no account needed.

Try one now

Pick an answer

Which routing protocol is a link-state interior gateway protocol?

The JNCIA-Junos exam at a glance

JNCIA-Junos (Junos, Associate) is Juniper Networks' entry-level certification for Junos OS, earned by passing exam JN0-106, which replaced JN0-105 on April 6, 2026. It covers networking fundamentals, Junos OS architecture (the Routing Engine and Packet Forwarding Engine), the CLI and configuration files, configuration basics, operational monitoring and maintenance, routing fundamentals, and routing policy and firewall filters, based on Junos OS 21.2. The exam has 65 multiple-choice questions in 90 minutes, in English, at Pearson VUE. Juniper reports pass or fail right after the exam and publishes no passing score. The certification is valid for three years, and there is no prerequisite.

Tigertest has 186 JNCIA-Junos practice questions with explanations, free to start with no account required.

Exam code
JN0-106 (replaced JN0-105 on April 6, 2026)
Questions
65 multiple choice
Time
90 minutes
Passing score
Not published; pass or fail shown at the end
Software
Junos OS 21.2
Language
English
Valid for
3 years
Given by
Juniper Networks, through Pearson VUE

Updated by the Tigertest team. Practice questions follow the Juniper Learning Portal JNCIA-Junos exam page and certification news, checked November 2026. Exam rules change, so confirm current details with Juniper: Junos, Associate (JNCIA-Junos).

How It Works

Drills by Objective

Seven drills, one for each JN0-106 objective: networking, Junos OS, the CLI, configuration basics, monitoring and maintenance, routing, and policy and firewall filters. Questions you miss come back until you have mastered them.

Practice Tests

Two 65-question tests in 90 minutes, the real exam's length and pace. Most questions ask which Junos command, hierarchy or value does a job, and subnetting answers are typed as a number. Practice Test 2 is held out of the drills, so it measures readiness.

Built on the JN0-106 Objectives

Juniper lists seven objective areas for JN0-106, based on Junos OS 21.2, but no weight for each. Every practice test here covers all seven in the split below, so you see the CLI, configuration and routing topics in roughly the proportion they come up.

Networking Fundamentals10 per test
Junos OS Fundamentals7 per test
User Interfaces10 per test
Configuration Basics11 per test
Operational Monitoring and Maintenance9 per test
Routing Fundamentals9 per test
Routing Policy and Firewall Filters9 per test
Tigertest mascot

Help Make Tigertest Better

Have an idea, a topic you'd like covered, or a question that could be clearer? We read every message and use it to improve every test.

Share Feedback

How to Pass the JNCIA-Junos Exam

1. Learn the candidate and commit model

Configuration mode edits a candidate, and nothing changes until you commit. Know commit check, commit confirmed, show | compare, rollback 0 to 49, the rescue configuration and the load options cold, because they come up in several objectives.

2. Get the architecture straight

The Routing Engine runs the routing protocols and the CLI and builds the routing table; the Packet Forwarding Engine forwards transit traffic from the forwarding table. Traffic for the device itself is exception traffic and goes to the Routing Engine.

3. Memorize the route preference values

Direct 0, static 5, OSPF internal 10, RIP 100, OSPF external 150 and BGP 170, with the lowest value winning. Then learn the default routing policies for each protocol and how a policy chain is read from left to right.

4. Practice on a lab device and drill your weak area

Type the commands on a lab router or a virtual Junos image: interfaces, static routes, a policy and a firewall filter on lo0. Tigertest tracks your accuracy by objective, so retake the drill you missed most until you clear 80 percent.

JNCIA-Junos Frequently Asked Questions

Is the JNCIA-Junos exam JN0-105 or JN0-106?

JN0-106. Juniper retired JN0-105 on April 5, 2026 and started JN0-106 on April 6, 2026. Both lead to the same JNCIA-Junos certification, which is valid for three years. Many study guides still say JN0-105, so check that yours follows the JN0-106 objectives.

How many questions are on the JNCIA-Junos exam?

JN0-106 has 65 multiple-choice questions and you have 90 minutes. It is given in English through Pearson VUE, and it is based on Junos OS 21.2.

What is the passing score for JN0-106?

Juniper does not publish one. You see a pass or fail result as soon as you finish the exam. Aim for a steady 80 percent on these practice tests before you book.

What is on the JN0-106 exam?

Seven objective areas: networking fundamentals, Junos OS fundamentals, user interfaces, configuration basics, operational monitoring and maintenance, routing fundamentals, and routing policy and firewall filters. Juniper does not publish a weight for each area.

Is the Tigertest JNCIA-Junos practice test free?

It is free to start, with no account required. Practice Test 1 and six of the seven drills are free; the last drill and Practice Test 2 are part of Tigertest Premium, one payment with no subscription. Create a free account if you want your progress saved across devices.

I teach a Junos or Juniper networking course. Can my students use Tigertest?

Yes, for free. Make a class at tigertest.io/teach, post one link, and students join with just their name. You see who practiced, their test scores and the topics your class misses most.

JNCIA-Junos sample questions and answers

6 of the 186 practice questions, one from each topic, with the answer explained.

  1. 1.

    A transit packet arrives with a TTL of 1. How does a Junos router handle it?

    • A.

      The Packet Forwarding Engine forwards it unchanged to the next hop

    • B.

      It handles it as exception traffic and returns ICMP time exceeded

    • C.

      It drops the packet silently in the switch fabric with no reply to anyone

    • D.

      It sends the packet out the management interface so it can be logged

    Answer: B.

    A packet whose TTL would expire cannot be forwarded, so it becomes exception traffic, and an ICMP time exceeded message goes back to the sender. Traceroute relies on that reply.

  2. 2.

    What is J-Web on a Junos device?

    • A.

      A routing instance used for management traffic

    • B.

      A Junos process that forwards web traffic in hardware

    • C.

      A browser-based interface for managing the device

    • D.

      A cloud service that stores rollback files

    Answer: C.

    J-Web is the graphical interface reached through a web browser. It covers common configuration, monitoring and maintenance tasks alongside the CLI.

  3. 3.

    An interface inherits apply-groups [ G1 G2 ]. Both groups set the MTU, G1 to 1500 and G2 to 9000, and the interface sets no MTU of its own. Which MTU is used?

    • A.

      The interface default

    • B.

      1500

    • C.

      The commit fails on the conflict

    • D.

      9000

    Answer: B.

    When groups disagree, the first group listed in apply-groups takes priority, so G1's 1500 wins. A value set directly on the interface would override both groups.

  4. 4.

    Which access does root password recovery on a Junos device require?

    • A.

      An SNMP read-write community

    • B.

      A console connection to the device

    • C.

      J-Web over HTTPS

    • D.

      An SSH session from any user account

    Answer: B.

    Recovery means rebooting into single-user or recovery mode and setting a new root password, which can only be done from the console. It does not work if the console port is configured as insecure.

  5. 5.

    What does unicast reverse-path forwarding check on an incoming packet?

    • A.

      Whether its destination address is in the routing table

    • B.

      Whether its DSCP value matches a forwarding class

    • C.

      Whether a route exists back to its source

    • D.

      Whether its TTL is greater than one

    Answer: C.

    Unicast RPF looks up the packet's source address; in strict mode it also checks that the packet arrived on an interface the router would use to reach that source. It drops spoofed sources.

  6. 6.

    A router has no route that matches a packet's destination and no default route. What does it do with the packet?

    • A.

      Floods it out every interface

    • B.

      Queues it until a route appears

    • C.

      Sends it back to the source

    • D.

      Drops it

    Answer: D.

    With no matching route, the packet cannot be forwarded and is dropped; the router may send an ICMP destination unreachable message to the source.

Every test on Tigertest is free to start, with no account needed.

See all 500 practice tests

Ready to Pass JNCIA-Junos?

Start for free. No account required. 186 questions across all seven exam objectives.

Start practicing